redlightcompany.co.uk
  • Home
  • LED Grow Light
  • LED Lights
  • Lights
  • Contact
  • More
    • Guest Post
    • Privacy Policy
Home - Lights
Category:

Lights

Lights

Why LED Neon Rope Lights Are Replacing Traditional Glass Neon?

by May 16, 2022
written by

The glass bulbs or tubes filled with compressed neon or other gases with the metal electrodes on both ends are called neon lights. LED neon lights are the advanced approach to lightning in which the neon effects are produced through LED semiconductors.

A LED neon rope light is an excellent replacement for traditional glass neon as these lights are energy-efficient, easy to install, and flexible. In this article, we will briefly explain;

  1. Difference between traditional and LED neon lights
  2. Why LED neon rope lights have a bright future?
  3. Applications of LED neon rope lights

Difference Between Traditional And LED Neon Lights

As mentioned above, neon lights use compressed gasses to produce light, while light-emitting electrodes are used for light production in LED lights.

LED technology is popular because of its cost-effectiveness, eco-friendly nature, and excellent quality. Other than these reasons, there are a lot more differences between both.

1. Energy Consumption

Neon lights are primarily used commercially and use a high amount of energy. However, the LED technology is specially designed for energy conservation. The LED neon rope lights consume almost 1 watt/ hour, while the traditional neon uses 15 times more energy.

2. Installation

LED neon rope lights are made from bendable and flexible materials like PVC. These lights are used anywhere without damage.

However, the traditional neon lights are made from glass that is sensitive to breakage. That’s why these lights are difficult to install.

3. Brightness

LED neon rope lights are much brighter than the traditional neon. These lights use a high density of lumens/meters, which enhances light intensity.

Due to the increased brightness of LEDs, these lights can be seen from a large distance which is impossible with traditional neon lights.

4. Maintenance

LED neon rope lights did not require any maintenance. However, the traditional neon needs timely maintenance as its gas gets used over time and needs refilling.

5. Life Span

LED neon rope lights can last for years without losing functionality and performance. The reason is that these lights consume very low energy, which makes them burnt resistant.

On the other hand, traditional neon lights have a short lifespan because of their gas consumption.

Why LED Neon Rope Lights Have A Bright Future?

Any product that demands less maintenance and provides long-term use is user-friendly. According to a professional standpoint, LED neon lights have a great future ahead because of;

  • Eco-friendly nature; no harmful gases used in LED lights
  • Provide a magical illustration and appealing effects
  • Highly durable, prone to damage and harsh environmental conditions
  • Provide a wide range of brightness
  • Easy to customize because of their flexible nature
  • Huge color variations from single color led neon rope (light) to multiple colors

Applications Of LED Neon Rope Lights

LED neon rope lights are used in;

  • Exterior and interior designing
  • Restaurants, nightclubs, bars
  • To highlight the signboards
  • Improved aesthetics
  • Commercial buildings

Conclusion

LED neon rope lights are rising in popularity and quickly replacing the traditional neon lights in many applications. Regardless of all the outstanding features of LED neon, there are applications where these lights cannot replace the traditional version.

So, before replacing your lights with LED, consider all the project requirements and ask for professional advice.

May 16, 2022 0 comment
0 FacebookTwitterPinterestEmail
Lights

Finding the best solar street light supplier the right way

by July 31, 2020
written by

Finding the best solar street light supplier is not an easy process to go through. You are most like to encounter a lot of difficulties that will result in not getting the best results. Before you proceed to find the perfect supplier for your solar street light, a few things must be check to ensure that you are dealing with it the right way.

The presence of solar street lights in your home and street is a perfect blend to add extra beauty and illumination to your home. It is one of the most highly sought after and preferred way of lighting up the street and outdoor area without spending a lot of generating electricity. The use of solar makes it very efficient in creating the perfect ambiance you will need to make your space look the best.

Getting the best solar street light supplier.

We know a lot of people find it hard to get good solar street light suppliers. This is mainly because they do not know the intricacies involved in the selection process. The good thing is that we are here to give you a few things you can look out for in potential suppliers before you settle for a unique decision.

1. Their reputation

Before you proceed to pick a brand that will do supply for you, you need to check out their reputation. This is very important. You must ensure that they do not have a bad name of fraud or scam in online or offline reviews.

In this type of business, the sincere opinion of others is better. Do not look out for only one opinion because you may get frustrated, look out for the brands that have good reviews online and offline, and work with them.

2. Their price ranges

Everything about getting a good solar street lamp boils down to price. You need to go for a supplier that fits very well into your budget.

If you have a budget planned out, choose the supply that would match your budget in a small range. You need to go for the best, however, if that doesn’t fit in your budget, then choose the next best.

The truth is that there will be some supplies that will be way above your budget. There will also be some that are beneath your budget. The main thing you need to do is to choose the one that will not make you less comfortable at the result in terms of pricing and service delivery.

3. The experience

The experience is very important when you are finding a good solar street light supplier. You do not want to look for someone that will give you a lot of tough time in solving certain problems you always need someone that you can rely on to give you the perfect supply services.

Conclusion

Finding the best solar street light supplier is not easy. However, you need to do the best you can to avoid scams. Choose the best supplier according to the criteria listed above and you are sure to get the best experience.

July 31, 2020 0 comment
0 FacebookTwitterPinterestEmail
Lights

A Look at the Different Types of LED Panel Lights

by July 17, 2020
written by

Many discerning buyers are currently turning towards the LED panel lights with the need to illuminate their spaces. LED panel lights are designed and made with low-weight aluminum diffusers, as discussed in the first blog posts. These lights are also elegant when it comes to lighting larger and smaller areas alike. A light-emitting diode does not need an obstructive installation or a lot of energy to turn on. For that reason, these lights have amassed many users’ attention for creating stylish lighting in the interior.

Types of LED Panel Lights

Depending on the needs you have, there are different types of LED panels from which you can select. In the most primary and basic installations, the LED panels are generally used in lighting with just a bit of adjustability.

But the chips found in the lighting panels can quickly produce limitless varieties of various lights coupled with LED panels.

Here are the major types of LED panel lights.

Square panels- most LED panels are square. Others are rectangular. The dimensions vary from 300*300 to 300*1200. You can always choose to select one of the sizes based on the type of fluorescent installation you are replacing is.

Round panels – then there are round LED panel lights, which are usually installed in a rather suspended setup. It is a prominent choice and selection of lighting since it provides its users with low-profile installation coupled with attractive and bright light.

The panels come in a variety of diameters, usually depending on the demands you have.

Colour changing panels – Besides general lighting at home and in offices, LED panels may be useful in creative lighting options, which can easily be changed using a remote control. These lights can be installed in ceilings to change lighting or better yet mounted on a wall where these same panels become an attraction.  

Backlit panels- as their name suggests, these ones work with the light sources found at the back of the lighting panels, which work for slightly deeper troffer types of lighting installation. Backlit panels project light from the front.

Temperature adjustable panels- these panels provide a substantial or full spectrum of light. You can adjust them from a warm incandescent style to a cooler fluorescent style of lighting using a remote control.

In other cases, the lights might be dimmed up or down depending on your lighting needs.

Edge-lit panels – with edge-lit panels, the source of light is mounted around the panel. So the light will enter into the device and shine from the surface.

These panels are also ideally designed for the drop-in ceiling panels, making them a prominent selection of the LED type of panel.

Final Thoughts

There are a variety of LED panel lights to choose from in the industry. In multiple installations, you will need to consider the emergency need associated with a particular investment. In case of power failure, then the emergency LED panels should be capable of providing some light in rather defined areas like as escape routes for about three hours.

July 17, 2020 0 comment
0 FacebookTwitterPinterestEmail
LED light
Lights

How LED lighting can save you money in the long run

by April 9, 2020
written by

In a world where being eco-friendly is becoming more critical for businesses and buildings, many owners and entrepreneurs are opting to implement LED retro fittings. The idea behind the LED retro fittings is to conserve energy by applying a component, technology, or accessory that was not previously available in the building. Many conversions that are taking place today are switches from incandescent lighting to LED-based lighting, including LED parking lot lights. For a broad range of lighting needs, LED light sources are the chief viable alternative that is currently under implementation. Let’s consider why you need an LED retrofit. 

Main advantages of an LED retrofit

  • Energy saving

The design and implementation of LED lighting solutions are built on the concept of energy-saving. There is also a significant improvement in the efficiency of energy utilization in the lighting element once LED is implemented.

  • Enhanced lighting quality

When considering the performance of a lighting source in terms of lighting quality, color temperature, and color rendering index (CRI) are significant concepts. LED lighting sources are preferable to alternative techniques because objects illuminated by LED light appear the same as during the daytime. LED lighting also ensures that the amount of light that illuminates a target area is a lot higher than that of alternative light sources for a given rating of power.

  • Significantly reduced recurring maintenance costs

In the world of lighting, maintenance expenses took the form of warranty protection and duration, cost of replacement lamps and fixtures, and cost of labor to replace damaged fixtures and spent lamps. You should also know the expected lifespan of a particular lighting technique. LEDs contain solid-state technology that is susceptible to burnt filaments and ruptured glass casings or leaking mercury. LED lighting is the only one that features a life span of more than 100,000 hours.

Factors to consider when implementing an LED retrofit

You should take into account the fact that LED lighting solutions do not work the same as regular lighting options:

  • Dimming components of LED lights are not compatible with most other traditional lighting hardware. To dim LED lights, you will need to buy LED dimmers.
  • Many LED solutions are designed to be compatible with widely available standard fixtures. However, remember that luminaries are different from accessories.

Consider plug and play LED options

Depending on your use case, and especially for large areas, a total overhaul to LED lighting may not be the most efficient plan for a business or building. If the owner has no intention of replacing the fixtures, then plug and play LED tubes are the best option. These specially crafted LED lamps can fit into your fixture without the added need for modifications and enhancements. Over some time, you can recoup the cost of the plug and play LED lighting solutions through the massive energy savings and reduced maintenance costs of LED lighting solutions.

Conclusion

Making the switch from regular lighting options to LED in a retrofitting exercise is a challenging undertaking. The most important benefits are increased energy savings and highly reduced maintenance costs of LED lighting systems.

April 9, 2020 0 comment
0 FacebookTwitterPinterestEmail
LED high bay light
Lights

Top Reasons why you should get a high bay LED bulb with motion sensors

by March 26, 2020
written by

High bay LED bulbs are the latest in the line of innovative inventions, and this lighting system is quite efficient when effectively deployed. One particular feature that stands out is its motion-detecting capacity. This feature makes the lighting bulbs quite beneficial in so many ways.

This article highlights some of those benefits attached to having motion sensing high bay LED bulbs within the indoor space.

Energy Consumption: The use of motion sensor bulbs in rooms and living space helps you cut down wastage to the barest minimum. What this implies is that these bulbs would automatically switch off as soon as it detects that power is no longer in use.

Convenience: High bay LED bulb is designed to ensure optimal ease when it comes toggling the power switch on and off. These bulbs automatically detect your presence in any area and turn the power on immediately; this is particularly helpful on occasions when you have your hands full of groceries or other items. This does not only save you time and energy, but it also ensures you have less contact with electricity.

Eco-friendly bulbs: High bay led bulbs to emit little to no emissions, and this makes this kind of lighting system environment-friendly. This essentially means workers can rest assured while working under the illumination of these bulbs. Furthermore, the motion-sensing capabilities of these bulbs ensure they do not stay on beyond working hours, and this increases their lifecycle.

Guards against intruders: The capabilities of these LED bulbs go beyond mere illumination as they are somewhat used in guarding against possible intruders in a facility. LED bulbs with motion sensors function effectively as security lights in warehouses and retail outlets.

Big and stuffy rooms: No one wants to fumble around a big dark room looking for the light switch; this is often the case with the conventional lighting bulbs. It might prove a big ask for anyone to begin to search for the location of the bulb switch. However, motion sensor lighting detects movement in the room and immediately powers the bulb.

It can be adjusted appropriately: One of the most significant benefits of the high bay motion sensor LED lighting system is the fact that you can always decide to change the detector’s sensitivity to any desired range. What this means is that; you could reduce the field if you think the bulb picks up way too much movement.

Final thoughts

The benefits of the motion sensor LED high bay lighting bulbs in the indoor setting cannot be over-emphasized. Apart from the fact that it ensures convenience, it also saves the user lots of money through its capability to conserve energy in bits.; other benefits such as the eco-friendliness and security capabilities of the bulb also makes these bulbs stand out. This article highlights the reasons why you should consider getting the LED high bay lighting system with motion sensors from https://xsylights.com/indoor-light/led-high-bay-lighting/.

March 26, 2020 0 comment
0 FacebookTwitterPinterestEmail

Recent Posts

  • Hardcore and Standard Currency Builds Made Easy with U4GM Sales
  • Pippit’s Handwriting Fonts That Help You Design Invitations and Custom Cards
  • Nicotine Pouches for Every Lifestyle: From Work to Travel
  • Custom Curtains by Unicurt: A Perfect Fit for Contemporary Homes
  • How Conveyor Belts Improve Efficiency in Manufacturing

Copyright All rights reserved.


Back To Top
redlightcompany.co.uk
  • Home
  • LED Grow Light
  • LED Lights
  • Lights
  • Contact
  • More
    • Guest Post
    • Privacy Policy